GSA-6000
Food grade industrial grease 100% synthetic
Description
The GSA-6000 is a synthetic, superior quality food industry grease which outperforms lithium, aluminum and polyurea base standard greases of the same viscosity.
Characteristics and Benefits
This formula is EXCLUSIVE to Prolab
The GSA-6000 unique formulation includes such elements as:
- Overbased calcium sulfonate complex
- Prolab Antifriction Treatment
- Superior quality synthetic oil
- Superior quality adherence agents
GSA-6000 food grade grease formula reaches an EXCEPTIONAL LEVEL of PERFORMANCE
In all season, it reduces friction, protects against rust, corrosion and oxidation, provides exceptional moisture, wear and load resistance as well as excellent thermal and mechanical stability. Even though the GSA-6000 food grade synthetic grease is classified as NLGI 2, it has pumpability characteristics similar to those of NLGI 0 grade: it is best suited for high rotational speeds (between 3000 and 10 000 rpm).
The GSA-6000 food grade synthetic grease is both POLYVALENT and ECONOMICAL
Encompasses three NLGI grades, thus allowing for reduced grease inventories and less frequent lubricating jobs and, consequently, less energy and grease consumption.
The GSA-6000 food grade synthetic grease is PRACTICAL and SAFE TO USE
It has approval from NSF (H1 - acceptable as lubricant with incidental food contact) , and also CFIA approved. It contains no contaminants harmful to health or the environment. It is offered in a variety of sizes.
Types of Application
The GSA-6000 food grade synthetic grease is a must for every type of business operating in the food industry.
TECHNICAL DATA SHEET safety data sheet grade 2
Directions for Use
Always use GSA-6000 food grade synthetic grease in reference to the equipment manufacturer's manual
Warning
Avoid unneeded contact with food during application. Use the minimum required quantity. Whenever performing a grease change, make sure to validate the compatibility of the various greases used (refer to PROLAB's grease compatibility chart).
Available Sizes
415 g, 17 kg, 55 kg, 180 kg
Product Code
# 275
| Characteristics | ASTM Test | Typical Values |
|---|---|---|
| Appearance | Beige | |
| N.L.G.I. Grade | 2 | |
| Viscosity at 40°C | D445 | 45 cSt |
| Viscosity at 100°C | D445 | 7,5 cSt |
| Viscosity Index | D2270 | 132 |
| Dropping Point | D2265 | 318°C |
| Oil Separation at 25°C | D1742 | 0,1% |
| Oil Separation at 100°C | D6184 | 0,2% |
| Evaporation Loss (22hrs à 99°C) | D972 | 0,11% |
| Consistency 60 X | D217 | 290 (1/10mm) |
| Shear Stability 100,000 X | D217 | 288 (1/10mm) |
| Shear Stability 10,000 X (50/50 with water) | D1831 | 0,3% |
| Roll Stability | D1831 | n.d. |
| Wheel Bearing Leakage | D4290 | 4.5g |
| Oxidation Stability 1000h | D942 | 4.0 psi |
| Bearing Life | D3527 | 280 hrs |
| 4-Ball Wear (75°C, 40 kg, 1200 t/m, 1h) | D2266 | 0,42 mm |
| Load Wear Index | D2596 | 55 |
| Weld Load | D2596 | 400 kg |
| Timken OK Load | D2509 | 27,2 kg |
| Rust Preventative | D1743 | Pass |
| Water Washout Loss at 80°C | D1264 | 0,5% |
| Corrosion - Copper Strip | D130 | 1b |
| Salt Fog (1 mil d.f.t.) | B117 | >300 hrs. |
|
Seals Compatibility: - NBR-L, 70 hrs. at 150°C, (% swell) - Hardness, Duromètre A - CR, 70 hrs at 100°C (% swell) - Hardness, Duromètre A |
D4289 |
3% -1 7,7% -4 |
| Dielectric breakdown |
D149 |
6.2 Kv |
|
Low Temperature Torque @ -18°C start @ -18°C after 1 hr. @ -29°C start @ -29°C after 1 hr. @ -40°C start @ -40°C after 1 hr. |
D1478 |
767 gr/cm2 117 gr/cm2 1827 gr/cm2 156 gr/cm2 3783 gr/cm2 598 gr/cm2 |
|
Pumpability + 15,5°C (60°F) -18°C (0°F) -23°C (-10°F) -29°C (-20°F) -34°C (-30°F) |
US Steel |
1154 gr/min 124,6 gr/min 74,8 gr/min 42,7 gr/min 25,6 gr/min |