GR-5000
Industrial grease for humid environments
Description
The GR-5000 is a superior quality grease for bearings which outperforms lithium, aluminum and polyurea base standard greases of the same viscosity.
Characteristics and Benefits
The GR-5000 unique formulation includes such elements as:
- Overbased calcium sulfonate complex
- Superior quality mineral base oil
This formula, maid from the latest thickener technologies, allows GR-5000 to reach an exceptional level of performance: it reduces friction, protects against rust, corrosion and oxidation, provides greater heat, moisture, wear and load resistance and enhances mechanical stability.
The superior qualities of the GR-5000 grease are not affected by temperature variations. Notable benefits from the use of the GR-5000 grease include less frequent lubricating jobs and substantial savings on maintenance costs.
Types of Application
The GR-5000 performs best in bearings with a top rotational speed of 3600 rpm: bearings for dryers, bearings exposed to water (wet end paper machine), calender rolls, bearings for heavy vehicles, electrical motors.
TECHNICAL DATA SHEET safety data sheet
Directions for Use
Always use GR-5000 multi-purpose grease in reference to the equipment manufacturer's manual.
Warning
Whenever performing a grease change, make sure to validate the compatibility of the various greases used (refer to PROLAB's grease compatibility chart).
Available Sizes
435 g, 17 kg, 55 kg, 180 kg
Product Code
# 268
| Characteristics | ASTM Test |
Typical Values |
|---|---|---|
| Appearance | Brown | |
| N.L.G.I. Grade | D217 | 2 |
| Viscosity at 40°C | D445 | 135 cSt |
| Viscosity at 100°C | D445 | 13,6 cSt |
| Viscosity Index | D2270 | 96 |
| Dropping Point | D2265 | 318°C |
| Oil Separation at 25°C | D1742 | 0,2% |
| Consistency 60 X | D217 | 280 (1/10mm) |
| Shear Stability 100,000 X | D217 | 2,4% |
| Shear Stability 100,000 X (50/50 with water) | D217 | 7,9% |
| Roll Stability | D1831 | 4% |
| Bearing Leakage Tendancy | D4290 | 4 SI |
| Oxydation Stability 1000h | D942 | 9 psi |
| Bearing Life | D3527 | 100 hrs. |
| 4-Ball Wear (75°C, 40 kg, 1200 t/m, 1h) | D2266 | 0,42 mm |
| Load Wear Index | D2596 | 62 |
| Weld Load | D2596 | 500 kg |
| Timken OK Load | D2509 | 27,2 kg |
| Rust Preventative | D1743 | Pass |
| Water Spray Resistance at 79°C | D1264 | 0,5% |
| Corrosion - Copper Strip | D130 | n/a |
| Saly Fog (1 mil d.f.t.) | B117 | >300 hrs. |
| Low Temperature Torque at -40°C | D4693 | 12 Nm |
|
Pumpability -18°C (0°F) -23°C (-10°F) -29°C (-20°F) -34°C (-30°F) |
10,9 gr/min 3,6 gr/min 1 gr/min 0 gr/min |